Modular Baseplate Augmentation: A Simple and Effective Method for Addressing Eccentric Glenoid Wear.

Document Type

Article

Publication Date

8-5-2024

Publication Title

Journal of shoulder and elbow surgery / American Shoulder and Elbow Surgeons ... [et al.]

Abstract

BACKGROUND: Augmented baseplates can be effective at addressing eccentric glenoid wear in reverse total shoulder arthroplasty (rTSA). However, these implants often come in a limited number of predetermined shapes that require additional reaming to ensure adequate glenoid seating. This typically involves complex instrumentation and can have a negative impact on implant stability. Modular baseplate augmentation based on intra-operative measurements may allow for more precise defect filling while preserving glenoid bone. The purpose of this investigation was to assess the stability of a novel ringed baseplate with modular augmentation in comparison to non-augmented standard and ringed baseplate designs.

METHODS: In this biomechanical study, baseplate micromotion was tested for three constructs according to American Society for Testing and Materials (ASTM) guidelines. The constructs included a non-augmented curved baseplate, a non-augmented ringed baseplate and ringed baseplate with an 8 mm locking modular augmentation peg. The non-augmented constructs were mounted flush onto polyurethane (PU) foam blocks, while the augmented baseplate was mounted on a PU block with a simulated defect. Baseplate displacement was measured prior to and after 100,000 cycles of cyclic loading.

RESULTS: Prior to cyclic loading, the non-augmented and augmented ringed baseplates both demonstrated significantly less micromotion than the non-augmented curved baseplate design (81.1 μm vs 97.2 μm vs 152.7 μm; p=0.009). After cyclic loading, both ringed constructs continued to have significantly less micromotion compared to the curved design (105.5 μm vs 103.2 μm vs 136.6 μm; p

CONCLUSION: In the setting of a simulated glenoid defect, locked modular augmentation of a ringed baseplate does not result in increased baseplate micromotion when compared to full contact, non-augmented baseplates. This design offers a simple method for tailored baseplate augmentation that can match specific variations in glenoid anatomy, limiting the need for excessive reaming and ultimately optimizing the environment for long term implant stability.

LEVEL OF EVIDENCE: Basic Science Study; Biomechanics.

Volume

S1058-2746

Issue

24

First Page

00535-4

DOI

10.1016/j.jse.2024.06.005

ISSN

1532-6500

PubMed ID

39111687

Link to Full Text

Share

COinS